top of page

CE Marking for Flooring: EN 14041, Declaration of Performance and What Importers Must Check

3 days ago
3 min read

Quick Answer

CE marking for flooring means the manufacturer declares that a floor covering meets the requirements of the harmonised standard EN 14041 under the EU Construction Products Regulation, backed by a Declaration of Performance. It applies to resilient, textile and laminate floor coverings sold into the EU. The declaration covers characteristics such as reaction to fire, formaldehyde release, pentachlorophenol content, slip resistance, electrical behaviour and thermal conductivity, as applicable to the product.


Introduction

Buyers in Europe often ask for CE marking, and some suppliers send a logo with no paperwork. CE is not a quality award, and it is not a green label. It is a legal declaration with a defined set of documents behind it. This guide explains what EN 14041 covers, what a Declaration of Performance should show and what an importer is responsible for checking.


CE Marking for Flooring: What Is Covered

Item

What it means

EN 14041

The harmonised standard for resilient, textile and laminate floor coverings

Construction Products Regulation

The EU law that requires CE marking and a Declaration of Performance for covered products

Declaration of Performance (DoP)

The document that states the product’s performance in each essential characteristic

CE mark

The marking on the product, packaging or documents that points to the DoP

Advanced automated packaging and production machinery at Yosemite Flooring manufacturing facility

Characteristics a DoP can include

Characteristic

Why it matters

Reaction to fire

The fire class of the floor, covered in our guide to flooring fire rating

Release of formaldehyde

Indoor air quality

Release of pentachlorophenol

A restricted substance in construction products

Slip resistance

Safety on the walking surface

Electrical behaviour

Static and conductivity needs in special areas

Thermal conductivity

Relevant for floors over underfloor heating

Which characteristics are declared depends on the product and its intended use.


What an Importer Should Check

Under the Construction Products Regulation, an importer placing products on the EU market has duties of its own. Check that the product carries the CE marking, that a Declaration of Performance exists and matches the product, that instructions and safety information are supplied in the required language, and that the importer’s name and contact details appear on the product or packaging. Great Britain has its own marking route, so confirm the rules for your market.


Common Mistakes

• Accepting a CE logo without a Declaration of Performance.

• Using a DoP that covers a different product or a different build-up.

• Confusing CE marking with emission labels such as those in our guide to low-VOC SPC flooring.

• Forgetting that environmental data, such as a flooring EPD, is a separate document.


What This Looks Like for Yosemite’s Flooring Range

Yosemite’s certificates are listed on its certificates page, and its environmental performance is documented in third-party EPDs. Requirements differ by product and market, so tell us the product line and the country you sell into, and our team will confirm which documents apply.


About Yosemite Flooring. Yosemite Flooring (Anhui Yosemite New Material Technology Co., Ltd.) manufactures LVT, SPC, LSPC and ABA SPC flooring for importers, distributors and project buyers, with production bases in China, Vietnam and Thailand. Its environmental performance is documented in third-party EPDs published in the International EPD System, including EPD-IES-0018227 for LSPC and EPD-IES-0018226 for LVT. Explore the full range at yosemiteflooring.com.


Frequently Asked Questions

Q: What is CE marking for flooring?

A: It is the manufacturer’s declaration that the floor meets EN 14041, supported by a Declaration of Performance.


Q: Is CE marking a quality certificate?

A: No. It is a declaration of declared performance, not an independent rating of overall quality.


Q: What is a Declaration of Performance?

A: A document that states the product’s performance in each essential characteristic, such as reaction to fire.


Q: Do I need CE marking to sell SPC flooring in the EU?

A: Covered floor coverings generally do. Confirm the current rules with your local authority or adviser.


Final Thoughts

CE marking for flooring is only as useful as the paperwork behind it. Ask for the Declaration of Performance, check that it covers the exact product and keep it with your import records. That protects you as the importer and gives your customers something they can verify.

If you would like to get more information from us, please follow our Instagram.

Comments


bottom of page