Flooring Fire Rating Explained: Bfl-s1, Cfl-s1 and ASTM E648 Class 1

Quick Answer
A flooring fire rating describes how a floor reacts to fire. In Europe, floors are classed under EN 13501-1 from A1fl to Ffl, with a smoke class of s1 or s2, so Bfl-s1 and Cfl-s1 are common requirements for public buildings. In North America, flooring is commonly tested to ASTM E648, where Class I means a critical radiant flux of 0.45 W/cm² or more. A better class means the floor helps a fire spread less.
Introduction
Fire requirements are one of the most common reasons a flooring tender is rejected, and one of the least understood. The same product can pass one specification and fail another, because the test methods and the class names are different. This guide explains the two main systems, shows how to read a fire class and lists what to check before you quote a project.
Flooring Fire Rating: The Two Main Systems
Point | Europe | North America |
Classification | EN 13501-1 | ASTM E648 |
Class names | A1fl, A2fl, Bfl, Cfl, Dfl, Efl, Ffl | Class I and Class II |
Key test | Critical heat flux with a radiant panel, plus a small flame test | Critical radiant flux with a radiant panel |
Smoke | Smoke class s1 or s2 | Reported separately, often under ASTM E662 |
Best result | A1fl, then A2fl, then Bfl | Class I, critical radiant flux of 0.45 W/cm² or more |
In the European system a lower letter is a weaker result. Bfl is better than Cfl, and s1 is better than s2 for smoke. In the North American system, Class II is a lower band, roughly 0.22 to 0.44 W/cm².
What s1 and s2 mean
The smoke class shows how much smoke the floor produces in the test. A rating written as Bfl-s1 combines a fire class with the lowest smoke class, which is why many specifications ask for the pair.
Tested as built
Fire tests are run on a specific build-up, which can include the underlay and the substrate. A report covers the tested construction, so a floor with a different underlay or core may need its own report.
Where Fire Ratings Matter Most
Fire requirements are strictest in public and commercial buildings such as schools, offices, hospitals and shops, and in escape routes such as corridors and stairs. They vary by country and building type, so always check the local regulation for the project. Our guides to school flooring durability and retail flooring for high foot traffic cover the wear side of the same projects.
How to Check a Fire Report
• Confirm the standard and the class named in the specification.
• Check that the report names the exact product and build-up, including any attached underlay.
• Check the test date and the laboratory.
• Match the class to the market. A European class does not replace an ASTM result, and the reverse is also true.
• Link the result to the product’s CE documents, as explained in our guide to CE marking for flooring.
What This Looks Like for Yosemite’s Flooring Range
Yosemite supplies LVT, SPC, LSPC and ABA SPC flooring for project and commercial buyers. Fire performance depends on the product line and build-up, so tell us the standard and class your specification names, and our team will confirm which test reports are available.
About Yosemite Flooring. Yosemite Flooring (Anhui Yosemite New Material Technology Co., Ltd.) manufactures LVT, SPC, LSPC and ABA SPC flooring for importers, distributors and project buyers, with production bases in China, Vietnam and Thailand. Its environmental performance is documented in third-party EPDs published in the International EPD System, including EPD-IES-0018227 for LSPC and EPD-IES-0018226 for LVT. Explore the full range at yosemiteflooring.com.
Frequently Asked Questions
Q: What does Bfl-s1 mean for flooring?
A: It is a European fire class, Bfl, combined with the lowest smoke class, s1, under EN 13501-1.
Q: What is ASTM E648 Class I?
A: A result of 0.45 W/cm² or more in the critical radiant flux test, the better of the two classes.
Q: Is a fire rating the same as being fireproof?
A: No. It shows how much the floor contributes to fire spread in a test, not that it cannot burn.
Q: Does an underlay change the fire class?
A: It can, because tests are run on a specific build-up. Check that the report matches the product you are buying.
Final Thoughts
A flooring fire rating is a test result with a name, a method and a build-up behind it. Check the class the project asks for, confirm the report covers the exact floor and keep the document with the order. That prevents the tender surprises that arrive late.
If you would like to get more information from us, please follow our Instagram.




Comments