top of page

SPC Flooring Underlay: IXPE vs EVA vs Cork and What Each Does for Sound and Comfort

21 hours ago
3 min read

Quick Answer

SPC flooring underlay is the cushion layer under the rigid core, either attached to the plank or laid loose. The common materials are IXPE, EVA and cork. An underlay reduces impact noise, adds comfort and hides very small subfloor imperfections, but it cannot fix an uneven subfloor, and an underlay that is too soft or too thick can weaken the click joints.


Close-up cross-section of SPC click flooring showing rigid core, wear layer, wood-look film, and attached dark grey IXPE acoustic underlayment with fine mesh texture

Introduction

Because SPC has a dense core, it can sound firm underfoot and carry footsteps into the room below. An underlay is the usual answer, but not every underlay suits every floor. This guide compares the three common materials, explains attached versus loose underlay and shows how to check sound claims.


SPC Flooring Underlay: IXPE vs EVA vs Cork

Material

What it is

Feel

Sound

Notes

IXPE

Cross-linked closed-cell polyethylene foam

Firm and stable

Good

The most common attached underlay, stable under click joints

EVA

Ethylene-vinyl acetate foam

Softer

Good

More cushion, but it can compress more

Cork

Natural cork, often as a layer or loose underlay

Warm and resilient

Very good

Heavier and usually more expensive

These are general characteristics. Density and thickness change the result, so always compare tested data.


Attached versus loose underlay

An attached underlay is bonded to the plank at the factory, which saves a step on site and keeps the thickness consistent. A loose underlay is laid separately, which gives more choice. Do not add a second underlay under a plank that already has one unless the installation guide allows it, because stacking cushion layers can make the click joints flex.


Sound claims: what to ask

Impact sound is usually reported as a reduction in decibels or as an IIC rating, and airborne sound as an STC rating. These figures depend on the whole floor system, including the slab, so ask for a test on a build-up like yours, not a figure for the underlay alone.


When an Underlay Helps and When It Does Not

• It helps with footfall noise in apartments and upper floors.

• It helps comfort in living areas.

• It helps hide tiny subfloor marks, but only within the tolerance in the guide. See our checklist for subfloor preparation for SPC flooring.

• It does not replace a flat subfloor.

• Joint noise from the floor itself is a different problem, covered in our guide on why SPC flooring clicks or pops.


Underlay and Thickness

When you compare quotes, check whether the stated thickness includes the underlay. Our SPC flooring thickness guide explains how total, core and underlay thickness differ.


What This Looks Like for Yosemite’s Flooring Range

Yosemite manufactures SPC, LVT, LSPC and ABA SPC flooring. Tell us whether you need an attached underlay, which material you prefer and the sound requirement of your market, and our team will confirm the available options for each line.


About Yosemite Flooring. Yosemite Flooring (Anhui Yosemite New Material Technology Co., Ltd.) manufactures LVT, SPC, LSPC and ABA SPC flooring for importers, distributors and project buyers, with production bases in China, Vietnam and Thailand. Its environmental performance is documented in third-party EPDs published in the International EPD System, including EPD-IES-0018227 for LSPC and EPD-IES-0018226 for LVT. Explore the full range at yosemiteflooring.com.


Frequently Asked Questions

Q: What is the best underlay for SPC flooring?

A: IXPE is the most common attached choice. The best one depends on your sound requirement and on the installation guide.


Q: Do I need an underlay if the plank has one attached?

A: Usually not. Adding another layer can weaken the click joints unless the guide allows it.


Q: Does an underlay make SPC feel softer?

A: Slightly. The rigid core still decides most of the feel, and a very soft layer can hurt joint stability.


Q: Can an underlay fix an uneven floor?

A: No. It hides tiny marks only. Flatten the subfloor to the tolerance in the guide.


Final Thoughts

SPC flooring underlay is a balance between sound, comfort and joint stability. Choose a material that matches the use, check whether the thickness figure includes it and ask for sound data on a build-up like yours. That keeps the floor quiet without making it unstable.

If you would like to get more information from us, please follow our Instagram.

Comments


bottom of page