top of page

SPC vs WPC Flooring: Core Differences Buyers Should Know Before Ordering

Nov 7
3 min read

Quick Answer

In the SPC vs WPC flooring comparison, SPC (stone plastic composite) has a dense, limestone-rich rigid core that is harder, thinner and more dimensionally stable. WPC (wood plastic composite) has a thicker, foamed core that feels softer and warmer underfoot but dents more easily and moves more. SPC usually suits commercial and high-traffic areas, and WPC suits comfort-first residential rooms.


Introduction

Both SPC and WPC are click-lock rigid-core vinyl floors, so they look similar in a catalogue. Their cores behave very differently, though, and the difference affects installation, shipping weight, comfort and claims. Note that naming varies by market, and some foamed-core products are sold under other labels, so always ask what the core is made of and request the specification.


SPC vs WPC Flooring: Side-by-Side Comparison

Feature

SPC

WPC

Core

Dense, limestone-rich

Foamed, lighter composite

Typical total thickness

Often thinner

Often thicker

Feel underfoot

Firm and cooler

Softer and warmer

Dent resistance

High

Lower

Dimensional stability

Very good

Good, but moves more

Sound

Firm, usually needs attached underlay

Quieter by nature

Weight

Heavier

Lighter

Best for

Commercial, high traffic, sun-exposed floors

Comfort-first residential rooms

Dent and load resistance

A dense SPC core resists point loads from furniture, trolleys and chairs. A foamed WPC core is more likely to show indentation under the same load. For offices, see our guide to rolling chairs on SPC flooring.


Close-up of a heavy metal caster wheel resting on light oak wood-look SPC flooring, demonstrating high dent and load resistance.

Comfort and sound

WPC feels softer and quieter in a living room or bedroom. SPC can feel firmer, which is why many SPC floors use an attached underlay to improve comfort and reduce sound.


Temperature stability

SPC is more stable when the room heats and cools, so it is a safer choice near large windows, in sunrooms and over underfloor heating. WPC can be used in these areas, but it needs more attention to gaps and run lengths.


Weight and freight

SPC is heavier per square metre. For importers, that means the weight limit of a container is often reached before its space runs out, a point we cover in our guide to SPC flooring container load.


How to Choose Between SPC and WPC

• Choose SPC for shops, offices, schools, rental properties and sunny rooms.

• Choose WPC where softness and quiet matter most and furniture loads are light.

• Ask for a written core specification and the thickness of the wear layer.

• Compare products on the same wear layer and finish, not only on core type.


What This Looks Like for Yosemite’s Flooring Range

Yosemite manufactures SPC, LVT, LSPC and ABA SPC flooring with a 0.55mm transparent PVC wear layer and a ceramic bead-reinforced UV coating, with the same décor patterns matched across the LVT, SPC and LSPC lines. Tell us the room type, traffic and market, and our team can recommend the line that fits. For how the core is built, read our guide to how SPC flooring is made.

About Yosemite Flooring. Yosemite Flooring (Anhui Yosemite New Material Technology Co., Ltd.) manufactures LVT, SPC, LSPC and ABA SPC flooring for importers, distributors and project buyers, with production bases in China, Vietnam and Thailand. Its environmental performance is documented in third-party EPDs published in the International EPD System, including EPD-IES-0018227 for LSPC and EPD-IES-0018226 for LVT. Explore the full range at yosemiteflooring.com.


Frequently Asked Questions

Q: Is SPC better than WPC?

A: Neither is better in every case. SPC is stronger and more stable, and WPC is softer and quieter.


Q: Which is more waterproof, SPC or WPC?

A: Both cores are water resistant. The joints and the subfloor decide how a floor handles standing water.


Q: Which is cheaper?

A: Price depends on thickness, wear layer and market, so compare equal specifications.


Q: Which is better for commercial use?

A: SPC is usually the safer starting point because of its density and dent resistance.


Final Thoughts

The SPC vs WPC flooring choice comes down to the core. A dense SPC core suits demanding spaces and large temperature swings, and a foamed WPC core suits rooms where comfort is the priority. Ask for the core specification, compare equal wear layers and plan for freight weight before you order.

If you would like to get more information from us, please follow our Instagram.

Comments


bottom of page