top of page

Herringbone and Chevron SPC Flooring: Pattern Differences, Layout and Click Installation Tips

Nov 11
3 min read

Quick Answer

Herringbone SPC flooring uses rectangular planks with square ends laid at right angles to form a broken zigzag, while chevron uses planks with angled ends that meet in a continuous V. Both bring a classic parquet look to click-lock SPC. They need smaller planks, a flatter subfloor, more careful layout and a larger waste allowance than standard straight planks.


Introduction

Straight planks are the default, but patterned floors are one of the most requested looks in feature areas. Herringbone and chevron are often confused, and the difference changes both the price and the installation. This guide explains how the two patterns differ, how click planks build the pattern and what to check before you order.


Herringbone SPC Flooring vs Chevron

Feature

Herringbone

Chevron

Plank ends

Square cut

Cut at an angle, commonly 45 or 60 degrees

Look

Broken zigzag with a staggered edge

Continuous V lines with clean points

Installation

Simpler cuts, the ends overlap the pattern

More precise, angled edges must match exactly

Waste

Moderate

Higher, especially at the borders

Typical use

Living rooms, hallways, feature areas

Entryways, formal rooms, statement floors

How click herringbone planks work

Click herringbone SPC commonly comes as two plank types, often called A and B, with mirrored locking edges so they can be laid alternately. Alternating them in the correct order is what builds the pattern, so cartons should contain both types in a clear, matched ratio.


Planning the layout

Start from the centre line of the room or the main sightline so the pattern looks symmetrical. Dry lay the first rows before you lock anything, and decide early whether the edge will be a cut border or a straight border. Run the pattern along the longest wall or toward the main light source.


Natural oak herringbone SPC click flooring dry lay pattern repeat check

Practical Checks Before You Order

• Subfloor flatness. Pattern lines make dips visible, so follow our checklist for subfloor preparation for SPC flooring.


• Waste. Patterned floors need a bigger allowance at the borders. Plan quantities with our flooring waste calculator and confirm the figure with your installer.


• Expansion gaps. A pattern does not remove the need for them, as described in our guide to expansion gaps for SPC flooring.


• Transitions. Plan a threshold where a patterned area meets straight planks.


• Sample. Check a full pattern repeat, not a single plank.


Where Herringbone Works Best

Patterned floors suit entryways, hallways and living rooms where the floor is a feature. Calm, mid-tone decors show the pattern clearly, while very busy grains can compete with it. In adjoining rooms, a plain plank floor in the same decor family keeps the home coherent.


What This Looks Like for Yosemite’s Flooring Range

Yosemite’s decor patterns match across the LVT, SPC and LSPC lines, which helps when a project mixes feature areas with plain plank floors. Tell us the pattern format you need, and our team will confirm which decors and plank formats are available.


About Yosemite Flooring. Yosemite Flooring (Anhui Yosemite New Material Technology Co., Ltd.) manufactures LVT, SPC, LSPC and ABA SPC flooring for importers, distributors and project buyers, with production bases in China, Vietnam and Thailand. Its environmental performance is documented in third-party EPDs published in the International EPD System, including EPD-IES-0018227 for LSPC and EPD-IES-0018226 for LVT. Explore the full range at yosemiteflooring.com.


Frequently Asked Questions

Q: Is herringbone SPC flooring hard to install?

A: With click planks it is manageable, but it needs a careful layout and a flat subfloor.


Q: Which costs more, herringbone or chevron?

A: Chevron usually costs more because of the angled cuts and higher waste. Compare quotes on equal specifications.


Q: How much extra flooring do I need for herringbone?

A: More than for straight planks, especially at borders. Confirm the figure with your installer.


Q: Can herringbone be combined with straight planks?

A: Yes. Use a transition strip or threshold at the doorway where the two meet.


Final Thoughts

Herringbone SPC flooring gives a classic parquet look with the practical benefits of click-lock rigid core. Choose between herringbone and chevron by the look you want and the waste you can accept, prepare a flat subfloor and check a full pattern repeat before you order.

If you would like to get more information from us, please follow our Instagram.

Comments


bottom of page